Sheet Cutter - Forge

Overview The Tool King Cold Chisel Set (TKCC3) is a 3-piece forged Cr-V set with sizes 3/8" (10mm), 1/2" (12mm), and 5/8" (16mm), built for cutting, shaping, and removing metal, bolts, rivets, or masonry. Each chisel features a hardened cutting edge that stays sharp through heavy use and a comfortable blue grip handle for shock absorption and secure control. The set comes in a handy storage tray, making it easy to keep organised in the toolbox or ute — essential gear for tradies or DIYers tackling metalwork, demolition, or automotive repairs where you need to chisel out stubborn parts without damaging tools or workpiece. Why You’ll Love It Three common widths (10mm, 12mm, 16mm) cover most cutting and prying jobs without needing extras Cr-V forged construction delivers tough performance and edge retention under hammer strikes Blue grip handles reduce vibration and provide a non-slip hold even when greasy or sweaty Built for Real Work These Tool King cold chisels are drop-forged from chrome vanadium steel with heat-treated tips for hardness and durability, ensuring they hold a sharp edge through repeated heavy hammering on metal, bolts, concrete, or brick. The tapered cutting edge slices cleanly without mushrooming, and the hex shank prevents rolling while the grip handles absorb shock to protect your hand. They're straightforward, jobsite-tough tools suited to Aussie workshops or renos — reliable for cutting off rusted bolts, splitting metal, or shaping welds without quick wear or failure. Perfect For Mechanics, fabricators, and tradies cutting metal, removing rivets, or shaping parts DIYers working on automotive repairs, metalwork, demolition, or general chiselling tasks

Overview The Handy Hardware Aviation Snips Left Cut 250mm are compound-action cutters with green handles that slice clean left-hand curves or straight lines through sheet metal up to 1.2mm thick. Built with sharp chrome vanadium blades and ergonomic grips, they're the reliable choice for roofers, HVAC techs and tradies who need precise left cuts without hand fatigue—tough gear that gets the job done fast and clean on flashing, ducting or colourbond. Why You’ll Love It Compound leverage gives powerful cuts with less effort, even on cold-rolled steel. Left-cut design keeps waste kerf to the right, perfect for tight anti-clockwise curves. Ergonomic green grips stay comfortable and secure during long jobs or in wet conditions. Built for Real Work Drop-forged chrome vanadium blades stay sharp longer with serrated edges that grip metal without slipping. The spring-loaded handles open automatically for faster repeat cuts, and the safety latch keeps blades closed in the toolbox. It's straightforward kit that handles Aussie sheet metal jobs like roofing, guttering or duct fabrication—cuts clean, lasts long, no drama. Perfect For Tradies cutting flashing, roofing iron, ducting or colourbond on site. Workshop pros shaping sheet metal or stainless for custom fabrication.

Overview This Hand Garden Fork is a compact, multi-tine tool (typically 3 or 4 prongs) designed for close-up gardening tasks like loosening soil, weeding, aerating, digging small holes, and transplanting in beds, pots, or borders. The sturdy tines penetrate compacted earth easily without cutting through roots like a trowel might, making it ideal for precise work where you need to avoid damaging plants. With an ergonomic handle for comfort, it's essential kit for getting into tight spots and keeping your garden tidy without heavy lifting or power tools. Why You’ll Love It Tines break up clods, lift weeds with roots intact, and aerate soil for better plant health Ergonomic handle reduces hand strain during detailed or prolonged garden sessions Compact design perfect for pots, raised beds, or borders where larger tools are awkward Built for Real Work Constructed with tough carbon steel or stainless steel tines for rust resistance and strength, this fork handles tough soil, roots, and stones while staying sharp and rigid. The hand-held build gives full control for targeted digging or weeding, even in wet or sticky conditions. It's straightforward, durable gear built to last through seasons of Aussie yard work — rain, sun, and rough use won't faze it, making it a reliable mate for everyday garden maintenance. Perfect For Gardeners and landscapers weeding, aerating, or prepping soil in beds and planters DIYers maintaining veggie patches, flower borders, pots, or small garden projects

Overview The Handy Hardware Precision File Set is a pack of 3 x 155mm carbon steel files with assorted profiles and comfortable dual-colour grips. These fine needle files are designed for detailed work like deburring, shaping, smoothing edges, or refining metal, plastic, wood, or soft materials in tight or intricate areas. The varied contours let you tackle different shapes and surfaces with control, making them a handy addition for mechanics, hobbyists, or tradies who need precise filing without the bulk of full-size files — solid, no-nonsense tools that get the fine stuff sorted. Why You’ll Love It Assorted profiles give versatility for flat, round, half-round, square, or triangular filing needs Comfort grip handles (blue and yellow) provide secure hold and reduced hand fatigue on detailed jobs Compact 155mm length perfect for precision control in confined spaces or small-scale work Built for Real Work Made from durable carbon steel with fine-cut teeth that hold their sharpness through repeated use on metal, alloys, or softer materials. The ergonomic dual-colour handles offer good leverage and a non-slip feel, even when hands get oily or sweaty, while the overall build stands up to regular workshop or shed tasks. They're straightforward, quality files suited to Aussie conditions — tough enough for deburring edges or shaping parts, simple enough for model making, jewellery, or general fine finishing without quick dulling or breakage. Perfect For Mechanics, hobbyists, and tradies deburring, smoothing, or shaping metal/plastic parts DIYers working on models, jewellery, woodworking details, or general precision filing tasks

Overview The Crescent Wiss Metalmaster® M7R Offset Aviation Snips are legendary compound-action cutters that slice through cold-rolled steel up to 1.2mm and stainless up to 0.8mm with minimal hand pressure. The offset jaw design keeps your hand clear of the metal for safer, cleaner long cuts, while the red grips signal straight or right-hand curves—tough, American-made gear that's been the go-to for sheet metal workers, HVAC techs and roofers for decades. Why You’ll Love It Compound leverage multiplies hand force, making tough cuts feel effortless without fatigue. Offset blades keep material flat and your knuckles safe on long straight runs or right curves. Precision-ground serrated jaws grip tight and prevent slippage, even on oily sheet. Built for Real Work Hot drop-forged molybdenum steel blades stay sharp longer and resist wear, with a non-slip serrated jaw that bites into metal without walking. The self-opening spring action and latch keep the tool ready for the next cut, while the ergonomic red grips reduce hand strain on big jobs. It's the classic red-handle Metalmaster that's proven itself on Aussie roofs, ductwork and metal fab for years—no drama, just clean, accurate cuts every time. Perfect For Tradies cutting ducting, flashing, roofing iron or colourbond on site. Workshop pros shaping sheet metal, stainless or aluminium for custom jobs.

Overview The Medalist Manual Tile Saw 150mm is a traditional hand-operated coping or rodsaw-style tool fitted with a tungsten carbide grit blade. It allows precise cutting of slots, angles, curves, and straight lines in ceramic, porcelain, wall, floor tiles, glass rods, marble, and similar hard materials – a non-powered, budget-friendly option for detailed tile work without electricity or water cooling. Why You’ll Love It Tungsten carbide grit blade cuts in any direction (push/pull/sideways) for intricate shapes Deep frame design accommodates larger tiles and provides good reach for slots or curves Compact and lightweight for easy control and storage in toolkits Built for Real Work Sturdy metal frame (likely steel) holds a 150mm tungsten carbide-coated blade that lasts significantly longer than standard hacksaw blades on hard materials. The grit edge grinds rather than teeth-cut, delivering clean results on tiles without chipping when used carefully – a practical choice for tilers doing small jobs, repairs, or curved cuts where a powered wet saw is overkill. Perfect For Tradies making precise cuts or slots in tiles during bathroom/kitchen installs DIYers handling detailed tile work, repairs, or curved shaping at home

Overview The Adjustable Circle Hole Cutter 30-120mm is a versatile, no-brand tool for cutting clean circular holes in wood, plastic, thin metal, plasterboard, and similar sheet materials. With alloy steel cutter blades and a centre drill, it adjusts from 30mm to 120mm diameter for a wide range of hole sizes – a practical, budget-friendly option for plumbers, electricians, carpenters, or DIYers needing precise cutouts without multiple fixed hole saws. Why You’ll Love It Adjustable diameter from 30-120mm covers most common hole sizes in one tool Alloy steel blades hold sharpness well for clean cuts with minimal tear-out Centre drill ensures accurate positioning and reduces wandering Built for Real Work The twin alloy steel cutter blades are mounted on an adjustable arm with a locking mechanism for precise diameter setting, while the replaceable centre drill guides the cut and provides stability. Designed for use in a standard drill (handheld or drill press), it works best on softer materials and thin sheet metal up to ~3mm – a simple, effective cutter for electrical boxes, plumbing pipes, or ventilation holes without the cost of branded hole saw kits. Perfect For Electricians and plumbers cutting holes for conduits, pipes, or outlets DIYers and tradies making cutouts in timber, drywall, or plastic panels

Overview The Bosch T718BF Flexible for Metal Sandwich Jigsaw Blade 3 Pack is a specialist Bi-metal blade designed for fast, straight cuts in sandwich panels, sheet metal and thicker metal sections up to 100mm. The flexible body reduces breakage on curved or plunge cuts, while the milled, wavy-set teeth deliver aggressive cutting in steel, aluminium and composite materials—proper gear for HVAC installers, roofers and metal fabricators who need reliable performance without blade snap. Why You’ll Love It Flexible BiM construction bends without breaking on curved or off-line cuts. Aggressive tooth geometry powers through sandwich panels and thick metal fast. 3-pack gives you spares ready for big jobs or when one inevitably gets pinched. Built for Real Work Bosch Bi-metal (bimetal) blade with milled, wavy-set teeth for rapid stock removal and reduced heat buildup. The T-shank fits most modern jigsaws, and the 100mm working length handles deep sandwich panels or sheet stacks. It's the blade pros reach for on metal roofing, ducting or vehicle bodywork—cuts clean, lasts long, no drama on site. Perfect For Tradies cutting insulated sandwich panels, roofing sheets or metal flashings. Workshop pros shaping sheet metal, aluminium or stainless for custom fabrication.

Overview The Bosch MA234X HCS Wood Jigsaw Blade Set is a handy 3-pack of high-carbon steel blades designed for clean and fast cutting in softwood, hardwood, plywood and chipboard. Including one clean-cut blade for curves (T144DP), one fast rough-cut blade (T344D), and one precision blade (T101B), it's the versatile starter pack for tradies and DIYers tackling general timber work—proper blades that deliver reliable performance without the fuss of buying singles. Why You’ll Love It Three essential blades cover clean curves, fast rough cuts and precision straight cuts in one pack. HCS construction flexes without snapping on plunge or curved work. T-shank fits Bosch, Makita, DeWalt, Festool and most modern jigsaws—no adapters needed. Built for Real Work High-carbon steel blades with ground teeth for sharp, efficient cutting and good chip clearance. The set handles thicknesses up to 100mm depending on blade, with the T144DP excelling on curves, T344D ripping fast straight/rough, and T101B giving splinter-free clean edges. It's the practical assortment carpenters and renovators keep in the kit for framing, flooring, cabinetry or demolition—cuts clean, lasts long, no drama on site. Perfect For Tradies rough-cutting timber framing or precision fitting cabinetry on renos. DIYers tackling decking, fencing, furniture builds or quick timber projects at home.

Overview The Medalist Nail Punch 3/16" (approximately 4.76mm tip) is a hardened steel tool for driving larger finish nails, brads, or pins below the surface of wood, trim, or decking without marring the surrounding material. The tapered tip seats neatly on nail heads, while the comfortable black grip handle absorbs shock and provides a secure hold during hammering. It's an essential punch for carpenters, deck builders, or DIYers finishing skirting, architraves, flooring, or outdoor timber — ensuring nails are set flush or recessed for a clean, professional finish ready for filler or paint. Why You’ll Love It 3/16" tip size suits larger finish nails and common decking or framing pins Hardened steel tip withstands heavy hammer strikes without deforming or mushrooming Comfort grip black handle reduces slippage and hand fatigue on extended jobs Built for Real Work Made from tough chrome vanadium or high-carbon hardened steel, this Medalist nail punch features a precision-ground, tapered tip that maintains its shape through repeated use, and a knurled striking end to prevent hammer slippage. The black grip handle offers cushioning and control in dusty, sweaty, or gloved conditions, while the overall build holds up to jobsite abuse without bending or quick wear. It's straightforward, durable gear suited to Aussie carpentry, decking, or home renos — perfect for sinking nails flush in hardwood, treated timber, or trim without leaving marks or splitting the wood. Perfect For Carpenters, deck builders, and tradies finishing trim, flooring, or outdoor timber projects DIYers working on home renovations, furniture repairs, or any woodworking where nails need to be hidden